詳細說明
游艇用錨機--采用電動機（液壓馬達）等帶動擺線針輪減速機調速，驅動絞纜筒作正（反）轉。產品按GB/T-設計、制造。產品經過多國船級社檢驗，國內市場占有率達%以上。性能穩定，
The motor (motor) and drive the cycloid pin wheel reducer drive, the drive sheave tube is (anti). Products according to GB/T- design, manufacturing. Products through the countries Veritas test, the domestic market share of more than %. Stable performance,
用途：產品安裝在艦船首、艉部主甲板上，在艦船起航時起錨或收纜，艦船停航拋錨、緊纜定位，為船舶系泊安全設備.
Use: the product is installed in the first, the ship stern main deck, anchor or cable collecting in ship set sail, the ship broke down, suspended cable tightening positioning, as the ship mooring safety equipment
分類：
Classification:
、按形式分為電動和液壓。
, the form is divided into electric and hydraulic.
、按用途分為系泊絞車和錨機。
, divided by use of mooring winch and anchor winch.
組成：采用亞光不銹鋼絞纜筒、船用不銹鋼錨鏈輪、船用行星減速機、進口船用帶剎車電機、主令電氣控制箱、主令控制器為IP型及無石棉環保剎車帶等組成。
Composition: it is wear resistant marine anchor chain wheel, marine planetary reducer, import the marine band brake motor, main electric control box, a master controller for IP and non asbestos brake band composed of environmental protection.
主要技術參數:
Main technical parameters:
、錨鏈直徑：.—mm
, the diameter of anchor chain: . - mm
、工作負荷：.—kN
, work load: . - kN
、絞車?yán)Γ?—kN
, winch pull: . - kN
、電機功率：—KW
, motor power: - KW
產品使用、安裝注意事項：
Product use, installation notes:
、產品使用前檢查油泵及減速機油位！
, the product before use, check the pump and gearbox oil level!
、產品應空載運行次各分鐘！
, the product should be no-load operation for times every minutes!
、產品在額定拉力和額定速度下，應能連續工作min，并應能在不小于.倍額定拉力的過載拉力作用下連續工作min。
, products in the rated capacity and rated speed, can work continuously for min, and min continuous work overload force in not less than . times the rated pull down.
