DMIover Ethernet
MODEL:PW-DT102
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
FEATURES
lCompliantHDCP.
lFlexible and scalable HDMI 1080p High Quality Video Broadcasting with Gigabit Ethernet LAN.
lExtends 1080p HDMI signals up to120m overa singleUTP Cat5e/6 cable.
lMulticasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading.
lSupport Point-to-Point, Point-to-Many and Many-to-Many network configuration.
lDual power input: 802.3af compliant PoE & DC5V.
lUp to8transmitters and more than 200 receivers possible in a single system.
lWith IR Control function ,it allows you control back the source at the end of destination
lBuilt-in DIP switch to change Group ID and Utility for remotely
lSupport IGMP v.1 &v.2 address
lSupport cascading Ethernet Switches up to 3 layers.
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
TABLE OF CONTENTS
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Maintenance
Product Service
Warranty
SPECIFICATIONS
Operating Temperature Range
|
-5 to +35℃(+23to +95℉)
|
Operating Humidity Range
|
5 to 90%RH (No Condensation)
|
Support Video Format
|
DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P
|
Output Video
|
HDMI,HDCP
|
Audio Sampling rate
|
32kHz, 44.1kHz and 48kHz
|
Transmission Distance
|
1080P@60Hz120m(Maximum) oversingleCAT5E/6 /24AWG/Solid
|
Power consumption
|
5V/1A DC , 802.3af PoE
Power consumption: Max. 8W
|
Dimension (L×W×H)
|
L94xW93.5x24.6mm
|
IR frequencyrange
|
38-56kHz
|
Net Weight
|
Receiver:255g,Transmitter:255g
|
TX&RX
|
Default IP address:192.168.168.55;MAC address:00:0b:78:00:60:01
Default IP address:192.168.168.56;MAC address:00:0b:78:00:60:02
|
Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.
Note2:one TX to many RX or manyTXconnect tomany RX,IP and MAC addressmust be different.
PACKING CONTENTS
1)Main Unit. Transmitter & Receiver HDMI Extender
2)Power adapter DC 5V 1Ax2PCS
3)IR-TX cable&IR-RX cable
4)Operating Instructions
PANEL DESCRIPTIONS
Transmitter Panel
①Indicator of power input②Status of signal connection③HDMI input
④IR-TX port⑤Resetbutton⑥Power input port⑦Ethernet port⑧DIP switch
4 bits DIP Switch:
1~4for 0~15 (group) ID selection (such as 0000,0001,0010 etc,)
Default Tx unicast IP address is 192.168.168.55 and can be configured from webpage.
Tx Group IP address: 239.168.168.1x, where x is the value of bits[3:0]
Receiver Panel